This 3 day package is for Gas Engineers to renew their ACS. The course covers:

CCN1 (inc CPA1), CENWAT, CKR1 & HTR1

You can swap CKR1 or HTR1 for MET1 if required.

ACS reassessments - package 

Joe Ferris

Very knowledgeable tutors . Take the time to guide you through the course and answer whatever questions you may have . The office side of the college is also very helpful 

Jerry  Hake

A friendly place to attend , and good communication regarding booking. Have used in the past & will do so again in the future. 

Alexander Davis

Very happy with service.  Initial stages signing up smooth and informative. Nikki was very helpful and  even managed to get me on a course late notice where other  competitors could not. Also would like to thank John the assessor who was very knowledgeable and was a pleasure to meet him and all staff i came into conversation with. 

Could improve on - Heating 

Garry  Tucker 

I have been to a few centres but they are not as good as you lot. I felt a ease and very supported on the days. Thank you to John and Tony.

ROSS COUZENS

Course was really good on price and the website was easy to use, extra training day was very useful to refresh your brain and put me in good stead to do my ACS reassessment a week later, big thanks to John and tony (makes a lovely cup of tea) who put us through the assessment, defo book with BGT if I do the course again.

James Standen

Very professional. All the reference books you need are there to hand. Plenty of coffee - even decaf! Thanks so much to John too.

Brent Pullen

As someone who was returning to Bristol Gas Training for a 5 year re assessment ACS I can confirm that this is a great place to take your resits . The staff are great and make you feel at ease from the start.  

Gareth Archer

Always an efficient and friendly service at BGT. They make the recertification process as painless as it can be. Recommended.  

Derek Tanswell

Attended acs and lpg renewal.. course was well run and the training facilities were perfect would highly recommend this place.

Chris Noakes

Very relaxed training centre. Processed my application very efficiently and the course was very good.

This 3 day package is for Gas Engineers to renew their ACS. The course covers:

CCN1 (inc CPA1), CENWAT, CKR1 & HTR1

You can swap CKR1 or HTR1 for MET1 if r...

This is an initial assessment for first time learners.

This course aims to help plumbers and heating engineers who want to install Vented and Unvented Domestic Hot Water Storage Systems to comply with the appropriate Building Regulations and Standards.

Trainees must hold a recognised trade qualification e.g. NVQ/SNVQ Level 2 or 3 in Plumbing and Heating, or Domestic Heating, which will include Water Regulations, or be working towards one and hold Water Regulations or have evidence of a number of years experience in the plumbing or heating industry and hold Water Regulations.

Domestic Hot Water Heating Systems (Unvented G3)

Chris Jennings

Great course and the tutor was good at explaining the course throughout the day. Felt welcome and was comfortable 

Steven  Blake

Great knowledge and presenting from tutor

Mark Medlicott

Great training. Comprehensive and hassle free. Relaxed environment and knowledgeable trainer. Did my unvented renewal and will be booking my ACS renewals next year there too. Excellent service. 

Domestic Hot Water Heating Systems (Unvented G3) Initial

Sam Holder

This course aims to help plumbers and heating engineers who want to install Vented and Unvented Domestic Hot Water Storage Systems to comply with the appropr...

LPG Renewal

Tim Clarke

First tim using Bristol gas training for my LPG reassessment. Would definitely recommend. Very relaxed atmosphere and very helpful. 

Dean Aspinwall

My third time using this training provider,  a brilliant training  provider, with really helpful members of staff, thank you,see you next year for NG. (See my previous review for more detail)!

Ross Ashman

Water regulations one day course for plumbers and heating engineers. 

Water Regulations

Great training as always. Very relaxed and helpful. Would recommend. Good value too. 

Question 1

What is your address?

This course is for engineers who are RENEWING their current Unvented qualification.

Please see our separate listing if you would like to do this course for the first time.

This course is for engineers who are RENEWING their current Unvented qualification.

Please see our separate listing if you would like to do this course for ...

Domestic Hot Water Heating Systems Unvented G3 Renewal

This 2 day course is aimed primarily at practicing plumbers and heating engineers who already have an understanding of the fundamental requirements of central heating systems and who wish to design and install energy efficient low temperature hot water heating systems that may use heat pumps as the heat source.

This is also a pre-requisite for the 3 day Heat Pump Course.

This 2 day course is aimed primarily at practicing plumbers and heating engineers who already have an understanding of the fundamental requirements of centra...

Low Temperature Hot Water Heating Systems

Please confirm you have the necessary qualification or experience to do this course.

**Heat Pump Technology and Domestic Air Source Heat Pump Course.**

Trainees should have a minimum N/SVQ Level 2/3 in Plumbing or equivalent earlier certication; orN/SVQ Level 2/3 in Heating and Ventilating (Domestic Installation) or equivalent earlier certication; or N/SVQ Level 2/3 in Heating and Ventilating (Industrial and Commercial Installation) or equivalent earlier certication; or N/SVQ Level 2/3 in Oil-Fired Technical Services or equivalent earlier certication; or N/SVQ Level 2/3 in Gas Installation and Maintenance or equivalent earlier certication; or Heating installers with minimum 3 years of experience installing wet central heating systems, evidenced either by manufacturer courses certication or Gas Safe Register, OFTEC, MCS or HETAS registration

**AND if not included in the above qualication**

- Water Regulations/Water Byelaws
- Low Temperature Hot Water Systems
- Stand-alone technical certicates/Vocationally Related Qualications (VRQ) (non-competency based)\
  are **NOT** acceptable

Recognised as a demonstration of competence for the Microgeneration Certication Scheme (MCS).

The manual includes:\
Heat pumps in context.\
How a Heat pump works – principles and components\
Insulation, heat losses and the eect of heating system design\
Domestic hot water, buer tanks and solar coils\
Ground heat exchangers\
Health and Safety\
Heat pump installation\
Maintenance and fault finding

Domestic Air Source Heat Pump Heat Pump Course

Heat Pump Technology and Domestic Air Source Heat Pump Course.

Trainees should have 

- a minimum N/SVQ Level 2/3 in Plumbing or equivalent earlier certication; orN/SVQ Level 2/3 in Heating and Ventilating (Domestic Installation) or equivalent earlier certication; or N/SVQ Level 2/3 in Heating and Ventilating (Industrial and Commercial Installation) or equivalent earlier certication; or N/SVQ Level 2/3 in Oil-Fired Technical Services or equivalent earlier certication; or N/SVQ Level 2/3 in Gas Installation and Maintenance or equivalent earlier certication; or Heating installers with minimum 3 years of experience installing wet central heating systems, evidenced either by manufacturer courses certication or Gas Safe Register, OFTEC, MCS or HETAS registration

**AND if not included in the above qualication**

- Low Temperature Heating Water Regulations/Water Byelaws Stand-alone technical certicates/Vocationally Related Qualications (VRQ) (non-competency based) are NOT acceptable

The training manual allows you to study in your own time, at your own pace, to reduce the time spent on the training course to a minimum. It is important that you study the content of the manual prior to attending the course to ensure that you are properly prepared and can take part in discussions during the course.

Recognised as a demonstration of competence for the Microgeneration Certication Scheme (MCS).

The manual includes: Heat pumps in context. How a Heat pump works – principles and components Insulation, heat losses and the eect of heating system design Domestic hot water, buer tanks and solar coils Ground heat exchangers Health and Safety Heat pump installation Maintenance and fault finding.

Heat Pump Technology and Domestic Air Source Heat Pump Course.

Trainees should have a minimum N/SVQ Level 2/3 in Plumbing or equivalent earlier certication;...

Domestic Air Source Heat Pump 3 day Course

ACS Refresher Training

The corse was really well run and the 2 chaps who took it where very good. Will be back in 5 years time. Excellent first class

Level 3 Award in the Periodical Inspection, Testing and Certification of Electrical Installation.

Dave Dowden

Sign up to the Bristol Gas Training Ltd newsletter to occasionally receive news, promotions and event information. You can unsubscribe at any time.

Bristol Gas Training Ltd  

Who we are, what we are about, and why we do what we love!

About us

We’d love to hear from you! Find out how to contact or find us below.

Get in touch

We are a leading training provider for Plumbing, Gas and Electrical apprenticeships. We have excellent purpose built workshops and End Point Assessment centre.

 We are proud to be selected by On Site Bristol (Bristol City Council) as their training provider for gas and electrical apprentices. We currently train over 100 apprentices and work with many employers in and around Bristol.

Bristol Gas Training Ltd / South West Construction Academy Ltd

Our events

Our events

Our events